Preliminary Procedures

1. Remove the windshield garnish trim-both sides. Refer to Windshield Pillar Garnish Molding Replacement.
2. Remove the sunshades. Refer to Sunshade Replacement.
3. Remove the sunshade anchors. Refer to Sunshade Replacement.

1

Front Header Panel Assembly

Procedure

1. Disconnect the 3 electrical connectors.
2. Add tape to the wiring harness along the A pillar sheet metal to hold down the additional Christmas tree attachment. This is necessary to prevent a rattle.

2

Front Header Panel Assembly Clip (Qty: 5)