Preliminary Procedures

Place the folding top in the service position. Refer to Folding Top Retainer Strap Installation Position .

1

Folding Top Front Location Pin Stowage Bumper Screws (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Disconnect the electrical connector and switch from the bumper. Refer to Folding Top Front Locating Pin Position Switch Replacement .

Tighten
10 N·m (89 lb in)

2

Folding Top Front Location Pin Stowage Bumper Pin

3

Folding Top Front Location Pin Stowage Bumper

Tip
Mark the location of the part with a grease pencil before removing .