Preliminary Procedures

1. Place the folding top in the service position. Refer to Folding Top Retainer Strap Installation Position .
2. Remove the rear section of the headlinder. Refer to Roof Retractable Rear Headlining Trim Panel Replacement .

1

Folding Top Front Location Pin and Receiver Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Mark the location of the part with a grease pencil before removing.

Tighten
10 N·m (89 lb in)

2

Folding Top Front Location Pin Receiver Shim

Tip
Ensure that the shim stays in place when removing the pin guide.

3

Folding Top Front Locating Pin

Tip
For the right side only, detach the electrical harness and hydraulic lines.