Preliminary Procedures

1. Place the folding top in the service position. Refer to Folding Top Retainer Strap Installation Position .
2. Remove the front section of the headlinder. Refer to Roof Retractable Front Headlining Trim Panel Replacement .

1

Folding Top Rear Latch Release Clip

2

Folding Top Rear Latch Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Mark the location of the part with a grease pencil before removing.

Tighten
10 N·m (89 lb in)

3

Front Top Rear Latch Front Clip

Tip
Ensure the linkage is adjusted before reinstalling the headliner.

4

Front Top Rear Latch