Preliminary Procedures

1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
2. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
3. Place drain pans under the vehicle as needed.

1

Power Steering Reservoir Inlet Hose Clamp

2

Power Steering Reservoir Inlet Hose

3

Power Steering Fluid Reservoir Outlet Hose Clamp

4

Power Steering Fluid Reservoir Outlet Hose

5

Remote Power Steering Fluid Reservoir Bracket Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

6

Remote Power Steering Fluid Reservoir Bracket Screw (Qty: 3)

Tighten
6 N·m (53 lb in)

7

Remote Power Steering Fluid Reservoir Bracket

8

Remote Power Steering Fluid Reservoir

Procedure

Fill and bleed the power steering system. Refer to Power Steering System Bleeding .

Tip
Clean any excess power steering fluid from the vehicle.