For 1990-2009 cars only
Removal Procedure
- Pull the weatherstrip from the pinch-weld flange. Move the weatherstrip toward the lower corners and around the complete opening.
- Clean all of the adhesive from the pinch-weld flange.
Installation Procedure
- Apply a bead of weatherstrip adhesive GM P/N 12345096 (Canadian P/N 993365) or equivalent to the edge of the pinch-weld flange and around the entire perimeter of the rear compartment opening.
- Install the center of the weatherstrip onto the gutter flange. Begin at the forward center of the opening between the hinge arms.
- Push down on the weatherstrip over the entire area until fully seated.
