Preliminary Procedures

1. Position the rear door window approximately half way down in the door.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement.
3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement.
4. Remove the rear door window retaining pin. Refer to Rear Side Door Window Replacement.
5. Push the window to the full up position and tape it in place.

1

Rear Door Window Regulator Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Use a flat-bladed tool to align the window guide to the window regulator when install.

Tighten
10 N·m (89 lb in)

2

Rear Door Window Regulator

Procedure

Disconnect the electrical connector.