Preliminary Procedures

Place the folding top in the service position. Refer to Folding Top Retainer Strap Installation Position .

1

Folding Top Lower Rear Panel Weatherstrip Retainer (Qty: 4)

Tip
There are 2 push-in- pins in each lower corner.

2

Folding Top Lower Rear Panel Weatherstrip

Tip

1. Loosen the 2-way tape along the front edge of the weatherstrip.
2. Use a plastic, flat-bladed tool to assist in the removal.

Use a lint free cloth and (VMP) Naphtha or a 50/50 mixture, by volume of isopropyl alcohol and water to remove the adhesive.

3. Dry the area thoroughly.
4. Do not touch the adhesive backing on the new weatherstrip.
5. Install the left and right sides corners push-in pins to the weatherstrip.
6. When reinstalling the weatherstrip ensure that the edge of the weatherstrip and window corners are in align.

Work the weatherstrip to the center.