Front Differential Carrier Preliminary Rotational Torque Measurement. Pontiac G6 2007

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 6T70/6T75 🢒 Front Differential Carrier Preliminary Rotational Torque Measurement

Callout

Component Name

Front Differential Carrier Assembly

Notice: Low bearing pre-load will cause premature failure of the front differential drive pinion gear.

Notice: Refer to Fastener Notice in the Preface section.

Tip

•	If the turning torque is not within specifications, the transfer gear assembly and differential bearing thrust whasher is incorrect and must be corrected. Refer to Front Differential Drive Pinion Gear Bearing Thrust Washer and Front Differential Bearing Washer Measurement .

•	Use a dial or beam torque wrench with DT-47793 to measure turning torque.

Tighten
4-12 N·m (35-106 lb in)

Special Tool

DT-47793 Differential Rotating Tool