GM Service Manual Online
For 1990-2009 cars only
Table 1: Removal
Table 2: Installation

Removal


Object Number: 1737815  Size: MF

Removal

Callout

Component Name

1

Front Differential Drive Pinion Gear Bearing Cup

Notice: Failure to apply the lubricant will cause damage to the bolt and nut threads.

Tip

    • Tighten J-45094 until it fits snugly on the bearing cup.
    • Adjust J 45124 so it sits on the case surface just beyond the bearing cup opening.
    • Apply the extreme pressure lubricant J 23444-A to the puller bolt threads to prevent damage to the bolt threads during bearing cup removal.
    • Hold the puller bridge nut and turn the bolt to remove the bearing cup.

Special Tools

    • J 23444-A Extreme Press Lubricant - 1/4 Ounce Tube
    • J-45094 Bearing Cup Remover
    • J 45124 Removal Bridge

2

Front Differential Drive Pinion Gear Lube Dam

Special Tools

    • J 6125-1B Slide Hammer with Adapter
    • DT-48055 Lube Dam Removal

Installation


Object Number: 1737817  Size: MF

Installation

Callout

Component Name

1

Front Differential Drive Pinion Gear Lube Dam

Special Tools

    • J 8092 Driver Handle
    • J-46630 Lube Dam Installer

2

Front Differential Drive Pinion Gear Bearing Cup

Notice: Support the back side of the torque converter housing while installing the bearing cup. Install the bearing cup until it stops moving. Applying excessive pressure to the bearing cup once it is seated could cause damage to the torque converter housing casting.

Special Tool

J-45087 Bearing Cup Installer