1

DT-47811-A Transmission Lift Plate

Caution: Handle with care, the transmission assembly weighs over 200 lbs. Bodily injury could occur if not handled properly.

Tip
After Installation of lift plate, raise the transmission with an overhead hoist.

Tighten
12 N·m (9 lb ft)

Special Tool

DT-47811-A Transmission Lift Plate

2

J-46625 Transmission Holding Fixture

Notice: Refer to Fastener Notice in the Preface section.

Tip
Adjust mounting block on fixture to match bosses on case, then tighten bolts to:

Tighten
13 N·m (10 lb ft)

Special Tool

J-46625 Transmission Holding Fixture