GM Service Manual Online
For 1990-2009 cars only

Tools Required

    • J 38836 Bushing Installer and Clutch Arbor
    • J 43276 Clutch Pilot Bearing Remover

Removal Procedure


    Object Number: 353275  Size: SH
  1. Remove the clutch. Refer to Clutch Pressure and Driven Plate Replacement .
  2. Important: When using the J 43276 , always secure the J 43276-1 tool body using a wrench. Do not allow the J 43276-1 tool to rotate. Failing to do so causes damage to the J 43276-1 tool body.

  3. Remove the clutch bearing using the J 43276 .
  4. 2.1. Install the J 43276-1 into the clutch pilot bearing .
    2.2. Using a wrench, secure the J 43276-1.
    2.3. Insert the J 43276-2 into the J 43276-1.
    2.4. Rotate the J 43276-2 clockwise into the J 43276-1 until the clutch pilot bearing is completely removed from the crankshaft.
    2.5. Rotate the J 43276-2 counterclockwise to remove the J 43276-2 from the J 43276-1.
    2.6. Remove the J 43276-1 from the tool body.

Installation Procedure


    Object Number: 260131  Size: SH
  1. Install a 5/8 inch washer (1) onto the J 38836 or equivalent. The washer serves as a stop against the crankshaft face and will assist in installing the bearing to the proper depth.
  2. Install the new pilot bearing (2) onto the tool.

  3. Object Number: 490867  Size: SH
  4. Install a new pilot bearing into the crankshaft using the J 38836 .
  5. Inspect the clutch pilot bearing for proper installation. A properly installed clutch pilot bearing will be installed until flush to the rear of the crankshaft.
  6. Install the clutch. Refer to Clutch Pressure and Driven Plate Replacement .