Preliminary Procedure

1. Remove the front air dam. Refer to Front Air Dam Replacement .
2. Place a drain pan under the vehicle.

Notice: Allow sufficient clearance around the transaxle oil cooler pipes and around the hoses to prevent damage or wear which may cause fluid loss.

3. Remove the transmission lines from the connector. Refer to Transmission Fluid Cooler Inlet Hose Replacement or Transmission Fluid Cooler Outlet Hose Replacement .

1

Transmission Fluid Cooler Hose Pipe Connector - Inlet

Notice: Refer to Fastener Notice in the Preface section.

Tighten
38 N·m (28 lb ft)

2

Transmission Fluid Cooler Hose Pipe Connector - Outlet

Tip
Inspect the transmission fluid level. Refer to Transmission Fluid Check .

Tighten
38 N·m (28 lb ft)