For 1990-2009 cars only
Removal Procedure
- Set the park brake and chock the wheels.
- Remove the retainer from the transaxle range selector cable mechanism.
- Disconnect the transaxle range selector cable terminal from the transaxle manual shift lever pin.
- Press the locking tabs inward in order to release the transaxle range selector cable from the bracket.
- Remove the console. Refer to Console Replacement .
- Disconnect the transaxle shift control cable terminal (1) from the shift lever pin.
- Release the transaxle shift control cable retainer (2) and remove the transaxle range selector cable from the transaxle control lever base.
- Remove the transaxle shift control cable grommet from the cowl panel.
- Remove the transaxle shift control cable from the vehicle.
Installation Procedure
- Guide the transaxle shift control cable through the pass-through in the cowl panel.
- Secure the transaxle shift control cable grommet by pressing the grommet into the pass-through hole in the cowl panel.
- Install the transaxle shift control cable to the transaxle control lever base. Insure the cable retainer (2) is fully secured to the transaxle control lever base.
- Connect the transaxle shift control cable terminal (1) to the shift lever pin.
- Install the console. Refer to Console Replacement .
- Install the transaxle range selector cable into the bracket.
- Connect the transaxle range selector cable terminal to the transaxle manual shift lever pin.
- Install the retainer to the transaxle range selector cable.
- Adjust the automatic transmission range selector cable. Refer to Range Selector Lever Cable Adjustment .
