For 1990-2009 cars only
Removal Procedure
- Set the park brake and chock the wheels.
- Disconnect the transaxle shift control cable terminal (1) from the transaxle manual shift lever pin (5).
- Remove the retainer (2) from the transaxle shift control cable.
- Press the locking tabs inward in order to release the transaxle shift control cable (3) from the cable bracket (4).
- Remove the console. Refer to Console Replacement .
- Disconnect the transaxle shift control cable terminal (1) from the shift lever pin.
- Release the transaxle shift control cable retainer (2) and remove the transaxle range selector cable from the transaxle control lever base.
- Remove the transaxle shift control cable grommet from the cowl panel.
- Remove the transaxle shift control cable from the vehicle.
Installation Procedure
- Guide the transaxle shift control cable through the pass-through in the cowl panel.
- Secure the transaxle shift control cable grommet by pressing the grommet into the pass-through hole in the cowl panel.
- Install the transaxle shift control cable to the transaxle control lever base. Insure the cable retainer (2) is fully secured to the transaxle control lever base.
- Connect the transaxle shift control cable terminal (1) to the shift lever pin.
- Install the console. Refer to Console Replacement .
- Install the transaxle shift control cable (3) to the cable bracket (4).
- Install the retainer (2) to the transaxle shift control cable.
- Connect the transaxle shift control cable terminal (1) to the transaxle manual shift lever pin (5).
- Adjust the control cable assembly. Refer to Shift Control Cable Adjustment .
