GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1207644  Size: SH
  1. Remove the instrument panel (I/P) cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
  2. Remove the I/P cluster screws.
  3. Remove the I/P cluster.
  4. Remove the I/P cluster wire harness connector.

Installation Procedure


    Object Number: 1207644  Size: SH
  1. Install the I/P cluster wire harness connector.
  2. Install the I/P cluster.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Tighten the I/P cluster screws.
  5. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  6. Install the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.
  7. Refer to Control Module References for programming and setup information.