GM Service Manual Online
For 1990-2009 cars only

Object Number: 1571849  Size: MF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Remove the outside door handle. Refer to Rear Side Door Outside Handle Replacement .

1

Rear Side Door Outside Handle Housing Bolt

Tighten
10 N·m (89 lb in)

2

Rear Side Door Lock Bolts (Qty: 3)

Tighten
10 N·m (89 lb in)

3

Rear Side Door Outside Handle Housing

Tip

  1. Release the inside handle cable retainers before removing the door lock.
  2. Disconnect the door lock electrical connector.
  3. Remove the door lock with the outside handle housing.
  4. Transfer the handle and lock rods to the new outside door handle housing.