Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Master Electrical Component List | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 |
Are the back up lamps off? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Remove the back up lamp relay. Refer to Relay Replacement . Are the back up lamps illuminated? | Go to Step 4 | Go to Step 5 |
4 | Test for a short to voltage in the backup lamp voltage supply circuit. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 9 | Go to Step 6 |
5 | Inspect for poor connections at the back up lamp relay. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 9 | Go to Step 7 |
6 | Inspect for poor connections at the fuse block - rear. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 9 | Go to Step 8 |
7 | Replace the back up lamp relay. Refer to Relay Replacement . Did you complete the replacement? | Go to Step 9 | -- |
8 | Replace the fuse block - rear. Refer to Power and Grounding Component Views . Did you complete the replacement? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
