GM Service Manual Online
For 1990-2009 cars only

    Object Number: 564010  Size: SH
  1. Ensure that the steering wheel is set in a straight ahead position.
  2. Loosen the tie rod jam nut (5).
  3. Adjust the toe to specification by turning the adjuster (6). Refer to Wheel Alignment Specifications .
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Tighten the tie rod jam nut (5).
  6. Tighten
    Tighten the tie rod jam nut (5) to 68 N·m (50 lb ft).

  7. Re-calibrate the steering wheel position sensor. Refer to Control Module References .