GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure

    Object Number: 1583634 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the oil pressure heat shield bolts and shield.

    3. Object Number: 1581861 Size: SH
  3. Disconnect engine oil pressure sensor electrical connector (1).

    4. Object Number: 1611428 Size: SH
  4. Remove the engine oil pressure sensor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1611428 Size: SH
  1. Install the engine oil pressure sensor.

    2. Tighten
    Tighten the sensor to 16 N·m (12 lb ft).


    Object Number: 1581861 Size: SH
  2. Connect engine oil pressure sensor electrical connector (1).

    3. Object Number: 1583634 Size: SH
  3. Install the oil pressure heat shield and bolts.

    4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  4. Lower the vehicle.