GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Engine 🢒 Engine Mechanical - 3.5L 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front wheels. Refer to Tire and Wheel Removal and Installation .

    3. Object Number: 1229965 Size: SH
  3. Remove the stabilizer shaft mounting clamp bolts and clamps from both sides of the vehicle.
  4. Remove the bushings from the stabilizer shaft.

Installation Procedure

    Object Number: 1229965 Size: SH
  1. Install the stabilizer bushings on the stabilizer shaft with the cut line facing rearward.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer shaft clamps and bolts.

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  3. Install the front wheels. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.