Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

1

Floor Tunnel Panel Brace Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Front Support Bolt

Tip
Place a suitable jackstand under the rear portion of the front support prior to the removal of the bolt.

Tighten
100 N·m (74 lb ft) plus 180 degrees rotation

3

Reinforcement Assembly Bolt (Qty: 2)

Tighten
50 N·m (37 lb ft)

4

Reinforcement Assembly

Tip
Pull downward on the floor tunnel panel brace and the rear portion of the front frame brace to gain clearance for the removal and installation of the reinforcement.