Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation .
3. Remove the left splash shield. Refer to Radiator Air Lower Baffle and Deflector Replacement .
4. Support the transaxle with a suitable stand.

1

Transaxle Mount Bracket to Mount Bolt (Qty: 2)

Tighten
50 N·m (37 lb ft)

2

Transaxle Mount Bracket to Transmission Bolt (Qty: 3)

Tighten
50 N·m (37 lb ft)

3

Transaxle Mount Bracket

Preliminary Procedures

1. Remove the battery tray. Refer to Battery Tray Replacement .
2. Install the engine support fixture. Refer to Engine Support Fixture .

1

Transaxle Mount to Transaxle Mount Bracket Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Transaxle Mount Bracket to Transaxle Bolt (Qty: 3)

Tip

1. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation .
2. Remove the left splash shield. Refer to Radiator Air Lower Baffle and Deflector Replacement .
3. Using the engine support fixture, lower the transaxle enough to access the transaxle mount bracket bolts.

Tighten
90 N·m (66 lb ft)

3

Transaxle Mount Bracket