GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G5 🢒 Transmission/Transaxle 🢒 Shift Lock Control 🢒 Transmission Control Replacement

Removal Procedure
  1. Remove the console trim plate. Refer to Console Front Trim Plate Replacement .
  2. If necessary, remove the shift control knob. Refer to Floor Shift Control Knob Replacement .

    3. Object Number: 851244 Size: SH
  3. Remove the shift cable retaining clip.
  4. Disconnect the shift cable from the shift control assembly.

    5. Object Number: 1663966 Size: SH
  5. Disconnect the shift lock solenoid harness connector (4).
  6. Remove the shift control nuts (2).
  7. Remove the shift control (3) from the vehicle.

Installation Procedure

    Object Number: 1663966 Size: SH
  1. Install the shift control (3) to the vehicle.
  2. Connect the shift lock solenoid harness connector (4).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the shift control nuts (2).

    4. Tighten
    Tighten the nuts to 25 N·m (18 lb ft).


    Object Number: 851244 Size: SH
  4. Connect the shift cable to the shift control assembly.
  5. If the shift control knob was removed, install the shift control knob. Refer to Floor Shift Control Knob Replacement .
  6. Install the console trim plate. Refer to Console Front Trim Plate Replacement .