Tools Required

Important: The 4th driven gear is a very tight press.

1. Press off the 4th driven gear using the J 36513  (2) and the J 44378  (1).




Important: The 3rd driven gear is a very tight press.

2. Remove the 3rd driven gear using the J 36513  (2) and the J 44378  (1).



3. Remove the 5th gear (1) and the two caged needle bearings (2).




Important: Do not contact the thrust washer under the reverse gear.

4. Remove the bearing collar using the J 36513  (2), under the reverse gear, the J 44378  (1), and a hydraulic press.



5. Remove the following components as an assembly:

5.1.	The bearing collar (1)

5.2.	The 5th gear blocking ring (2)

5.3.	The 5th/Reverse synchronizer assembly (3)

5.4.	The reverse blocking ring (4)

5.5.	The reverse gear (5)

5.6.	The caged needle bearing (6)





Important: Ensure that the J 36513 is not making contact with the pinion gear before pressing off the collar and thrust washer.

6. Remove the collar and the thrust washer using the J 44378  (1), the J 36513  (2), and a hydraulic press.