GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Firebird 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure

    Object Number: 181095 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the stabilizer shaft upper nut and bushing (7).
  3. Remove the stabilizer shaft bolt (3).
  4. Remove the stabilizer shaft spacer (5) between the lower control arm (4) and stabilizer shaft (6).

Installation Procedure

    Object Number: 181095 Size: SH
  1. Install the stabilizer shaft spacer (5) between the lower control arm (4) and the stabilizer shaft (6).
  2. Install the stabilizer shaft bolt (3).
  3. Install the stabilizer shaft upper nut and bushing (7).

    4. Tighten
    Tighten the stabilizer shaft upper nut and bushing (7) to 23 N·m (17 lb ft).

  4. Lower the vehicle.