GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Firebird 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lift Window Strut Replacement

Removal Procedure
  1. Raise the coupe rear liftgate and support.

    2. Object Number: 392580 Size: MH
  2. Remove the bolt (4) from rear liftgate strut rod (3) and body.

    3. Important: A flat-blade screwdriver may be used if necessary to pry strut from mount with care not to damage strut.

  3. Remove the rear lift panel strut (2) from the rear trunk lid mount (1) and remove from vehicle.

Installation Procedure

    Object Number: 392580 Size: MH

    Important: Ensure that the strut end "snaps" into place then tug on strut end to ensure it is securely installed.

  1. Install the rear lift panel strut (2) to the rear trunk lid mount (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolt (4) to rear liftgate strut rod (3) and body.

    3. Tighten
    Tighten the bolt (4) to 27 N·m (20 lb  ft).

  3. Remove the support and close the liftgate.