Rear End Panel Replacement Pontiac

1. Remove the taillamps. Refer to Tail Lamp Replacement in Lighting Systems.



2. Remove the filler (1).

1. Install the filler (1).
2. Install the taillamps. Refer to Tail Lamp Replacement in Lighting Systems.

Rear End Panel Replacement Chevrolet

1. Remove the taillamp assemblies. Refer to Tail Lamp Replacement in Lighting Systems.



2. Remove the rear end panel retainers (3) (plastic nuts) from the cargo compartment interior.
3. Remove the rear end panel (2) from body support (1).

1. Install the rear end panel (2) to body support (1).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the rear end panel retainers (3) (plastic nuts) to the cargo compartment interior.

Tighten
Tighten the retainers (3) until seated but not stripped.

3. Install the taillamp assemblies. Refer to Tail Lamp Replacement in Lighting Systems.