Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Perform the following
steps in order to adjust the window panel flush to the quarter outer panel:
| 1.1. | Center the window in the opening. |
| 1.2. | Open the window panel. |
| 1.5. | Close the window panel. |
| 1.6. | Move the window panel as needed. |
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Adjust the window panel flush to the quarter trim finish panel.
- Loosen or tighten the bumpers as needed (2).
