Belt Reveal Molding Replacement Chevrolet Convertible

1. Lower the folding top.
2. Remove the quarter belt reveal molding bolts/screws (3).
3. Remove the quarter belt reveal molding (1) with seal (2).
4. Remove the quarter belt reveal molding seal (2) from quarter belt reveal molding (1).
5. Remove any old adhesive from molding (1).

1. Remove the paper backing from adhesive on quarter belt reveal molding seal (2).
2. Install the quarter belt reveal molding seal (2) to quarter belt reveal molding (1).
3. Install the quarter belt reveal molding (1) with seal (2) to rear quarter.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install quarter belt reveal molding bolts/screws (3).

Tighten
Tighten the bolts/screws (3) to 1.7 N·m (15 lb in).

5. Raise the folding top.

Belt Reveal Molding Replacement Pontiac Convertible

1. Lower the folding top.
2. Remove the quarter belt reveal molding bolts/screws (1).
3. Remove the quarter belt reveal molding (3) with seal (2).
4. Remove the quarter belt reveal molding seal (2) from quarter belt reveal molding (3).
5. Remove any old adhesive from molding (3).

1. Remove the paper backing from adhesive on quarter belt reveal molding seal (2).
2. Install the quarter belt reveal molding seal (2) to quarter belt reveal molding (3).
3. Install the quarter belt reveal molding (3) with seal (2) to rear quarter.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install quarter belt reveal molding bolts/screws (1).

Tighten
Tighten the bolts/screws to 1.7 N·m (15 lb in).

5. Raise the folding top.