For 1990-2009 cars only
Phase Adjustment Procedure
- Operate the horizontal adjuster switch until one adjuster reaches a full-forward position.
- Detach the horizontal drive cable (1) from the full-forward adjuster.
- Operate the horizontal adjuster switch until the other adjuster reaches a full-forward position.
- Connect the horizontal drive cable (1).
- Inspect the horizontal travel.
- Operate the vertical adjuster switch until one adjuster reaches the full-up position at both the front and the rear.
- Disconnect both the front and the rear vertical drive cables (2) from the full-up adjuster.
- Operate the vertical adjuster switch until the other adjuster reaches the full-up position at both the front and the rear.
- Connect the vertical drive cable (2).
- Inspect the vertical drive cable.
Important: The adjuster is out of phase when 1 adjuster reaches either the maximum horizontal or the maximum vertical travel before the other adjuster. An out-of-phase adjuster can occur over time or when the seat is serviced.
