GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Firebird 🢒 Body and Accessories 🢒 Seats 🢒 Power Seat Riser Trim Cover Replacement

Removal Procedure
  1. Place protective tape over nearby trim and paint.

    2. Object Number: 330661 Size: MH
  2. Remove the front bucket power seat from the vehicle. Refer to Front Seat Replacement - Bucket .

    3. Object Number: 330827 Size: MH
  3. Remove the seat adjuster mechanism from the front seat bucket cushion frame. Refer to Manual Seat Adjuster Mechanism Replacement .

    4. Object Number: 330712 Size: SH
  4. Remove the screw (7) from the trim finish panel (1), and remove the trim finish panel from the seat adjuster track.

Installation Procedure

    Object Number: 330712 Size: SH
  1. Install the trim finish panel (1) to the driver seat adjuster track.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screw (7) to the trim finish panel (1).

    3. Tighten
    Tighten the screw to 2 N·m (15 lb in).


    Object Number: 330827 Size: MH
  3. Install the seat adjuster mechanism to the front seat bucket cushion frame. Refer to Manual Seat Adjuster Mechanism Replacement .

    4. Object Number: 330661 Size: MH
  4. Install the front bucket power seat. Refer to Front Seat Replacement - Bucket .
  5. Remove the protective tape over nearby trim and paint.