GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Firebird 🢒 Body and Accessories 🢒 Seats 🢒 Front Seat Back Hinge Cover Replacement

Removal Procedure
  1. Remove the front bucket seat (1). Refer to Front Seat Replacement - Bucket .

    2. Object Number: 728022 Size: SH
  2. Remove the screws from the hinge trim cover (2).
  3. Remove the hinge trim cover (2) from the seat (1) by carefully pulling out and upward in one motion.
  4. Remove the switches (3,4,5) from the hinge trim cover, if equipped.

Installation Procedure
  1. Install the switches (3,4,5) to the hinge trim cover, if equipped.

    2. Object Number: 728022 Size: SH
  2. Install the hinge trim cover (2) to the front bucket seat (1) by carefully pushing in and downward in one motion.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws to the hinge trim cover  (2).

    4. Tighten
    Tighten the screws to 1.7 N·m (15 lb in).

  4. Install the front bucket seat (1). Refer to Front Seat Replacement - Bucket .