GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Firebird 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Open Assist Rod Stud Replacement

Removal Procedure

    Object Number: 318932 Size: SH
  1. Open the hood (1). Safely support the hood.
  2. Complete the following steps in order to remove the hood open assist rod from the hood strut stud:
    3. 2.1. Pry the clip out with a flat bladed tool.
    2.2. Pull the assist rod from the hood strut stud.
  3. Remove the hood open assist rod bracket bolts/screws (2).
  4. Remove the hood open assist rod bracket (3).

Installation Procedure

    Object Number: 318932 Size: SH
  1. Install the hood open assist rod bracket (3).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the hood open assist rod bracket bolts/screws (2).

    3. Tighten
    Tighten the hood open assist rod bracket bolts/screws (2) to 23 N·m (17 lb ft).

  3. Remove the hood support.