Rear License Plate Bracket Replacement Export

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



2. Remove the rear license plate.
3. Remove the rear license plate bracket screws.
4. Remove the rear license plate bracket from the vehicle.

1. Install the rear license plate bracket to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the rear license plate bracket screws.

Tighten
Tighten the rear license plate bracket screws to 5 N·m (44 lb in).

3. Install the rear license plate.
4. Lower the vehicle.