Did you perform the Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Retained Accessory Power

1. Close the vehicle doors.
2. Close the rear compartment lid.
3. Turn the ignition to the RUN position.
4. Turn the ignition to the OFF position.
5. Wait at least 10 minutes.

Do all of the RAP functions still operate after the 10 minute timeout period?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Important: Perform the set up procedure of the body control module.

Replace the BCM. Refer to Body Control Module Replacement in Body Control System.

Is the repair complete?

--

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3