Step | Action | Value(s) | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Diagnostic System Check? | -- | ||||||||||
2 |
Do all of the RAP functions operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |||||||||
3 |
Does the radio operate? | -- | ||||||||||
4 |
Does the test lamp illuminate? | -- | ||||||||||
5 | Connect a test lamp between the BCM connector C2 terminal F and terminal A. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | ||||||||||
6 | Test for and repair a poor connection at the BCM connector C2 and connector C3. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and repair a poor connection? | -- | ||||||||||
7 | Repair the open in circuit 650 between the BCM connector C3 terminal C1 and S217. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
8 | Repair the open in circuit 650 between the BCM connector C2 terminal A and S217. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
9 |
Does the test lamp illuminate? | -- | ||||||||||
10 | Connect a test lamp between the BCM connector C2 terminal C and ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | ||||||||||
11 | Repair the open in circuit 75 between the BCM and the IP fuse block. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
12 | Test for and repair a poor connection at the BCM connector C2 terminal C and terminal D. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and repair a poor connection? | -- | ||||||||||
13 | Repair the open in circuit 4 between the BCM connector C2 terminal D and S254. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
14 |
Important: Perform the set up procedure of the body control module. Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the replacement? | -- | -- | |||||||||
15 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
