Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Diagnostic System Check? | -- | ||
2 |
Does the security LED flash? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 |
Does the security LED illuminate? | -- | ||
4 | Test for and repair a poor connection at the BCM connector C3 terminal C1 and terminal C16. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and repair a poor connection? | -- | ||
5 |
Important: Perform the set up procedure for the body control module. Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the replacement? | -- | -- | |
6 |
Does the test lamp illuminate? | -- | ||
7 | Test for and repair a poor connection in circuit 1376 between the security LED and the BCM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and repair a poor connection? | -- | ||
8 |
Did you complete the replacement? | -- | -- | |
9 | Repair the open in circuit 650 between S217 and the security indicator. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
