GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 523628  Size: SH
  1. Open the instrument panel (IP) storage compartment door.

  2. Object Number: 517343  Size: SH
  3. Remove the IP compartment door striker bolts.
  4. Remove the IP compartment door striker.

Installation Procedure


    Object Number: 517343  Size: SH
  1. Align the IP compartment door striker to the I/P.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the IP compartment door striker bolts.
  4. Tighten
    Tighten the bolts to 2 N·m (18 lb in).


    Object Number: 523628  Size: SH
  5. Close the IP storage compartment door.