Name | Location | Locator View | Connector End View |
|---|---|---|---|
Body Control Module (BCM) | Under the right side of the IP near the blower motor | Body Control System Component Views in Body Control Systems | Body Control System Connector End Views in Body Control Systems |
Data Link Connector (DLC) | Under the IP, right of the steering column | Data Link Communications Component Views in Data Link Communications | Data Link Communications Connector End Views in Data Link Communications |
Engine Oil Pressure Sensor (Switch) (V6 VIN K) | On the top right side of the engine | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Engine Oil Pressure Sensor (Switch) (V8 VIN G) | On the top rear of the engine, near the left cylinder head | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Engine Wiring Harness Junction Block 2 | In the left front corner of the engine compartment | Power and Grounding Component Views in Wiring Systems | -- |
Instrument Cluster | On the left side of the IP | ||
IP Fuse Block | On the left end of the IP carrier | -- | |
Powertrain Control Module (PCM) (V6 VIN K) | On the right side of the engine compartment, rear of the wheelhouse | Power and Grounding Component Views in Wiring Systems | Powertrain Control Module Connector End Views in Engine Controls |
Powertrain Control Module (PCM) (V8 VIN G) | On the right side of the engine compartment, rear of the wheelhouse | Engine Controls Component Views in Engine Controls | Powertrain Control Module Connector End Views in Engine Controls |
Splice Pack SP200 | Under the left side of the IP, near the DLC | Lighting Systems Component Views in Lighting Systems | Data Link Communications Connector End Views in Data Link Communications |
C200B (18 cavities) | Forward lamp to IP harness, between the left kick panel and the steering column | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200D (48 cavities) | Part of the IP harness, between the left kick panel and the steering column | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C220 (10 cavities) | IP to engine harness, under the right side of the IP, behind the knee bolster | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C230 (10 cavities) | IP to engine harness, under the right side of the IP, behind the knee bolster | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G110 (V6 VIN K) | In the front of the engine, bolted to the pulley above the A/C clutch connector | Harness Routing Views in Wiring Systems | -- |
G110 (V8 VIN G) | Attached to the rear of the left cylinder head | Harness Routing Views in Wiring Systems | -- |
G200 | Near the left A-pillar, bolted to the IP mounting stud behind the kick panel | Harness Routing Views in Wiring Systems | -- |
P100 | Left side in the dash panel, engine to the passenger compartment | Harness Routing Views in Wiring Systems | -- |
P110 | Right side in the dash panel, engine to the passenger compartment | Harness Routing Views in Wiring Systems | -- |
S110 (V6 VIN K) | In the engine harness, approximately 4 cm (1.6 in) from the powertrain control module (PCM) breakout | -- | -- |
S110 (V8 VIN G) | In the engine harness, main branch, approximately 20 cm (7.9 in) from the powertrain control module (PCM) breakout | -- | -- |
S170 | In the forward lamp harness, approximately 13 cm (5.1 in) from G106 breakout | -- | -- |
S206 | In the IP harness, at the rear compartment lid release relay breakout | -- | -- |
S211 | In the IP harness, main branch, approximately 7 cm (2.8 in) from the rear compartment lid release relay breakout | -- | -- |
S215 | In the IP harness, main branch, approximately 11 cm (4 in) from the antenna cable breakout | -- | -- |
S216 | In the IP harness, main branch, approximately 10 cm (4 in) from the instrument cluster breakout | -- | -- |
S224 | In the IP harness, main branch, approximately 17 cm (6.7 in) from the instrument cluster breakout | -- | -- |
S242 | In the IP harness, approximately 4 cm (1.6 in) from the data link connector (DLC) breakout | -- | -- |
