Instrument Panel Accessory Trim Plate Replacement Chevrolet

1. Unsnap the instrument panel (IP) accessory trim plate (2).
2. Remove the electrical connectors (1) from the switches (3), if equipped.



3. Remove the fog lamp or second gear start switch located in position 1, if equipped.



4. Remove the second gear start, rear fog lamp, or traction control switch located in position 2, if equipped.
5. Remove the rear fog lamp switch located in position 3, if equipped.

1. Install the rear fog lamp switch located in position 3, if equipped.
2. Install the second gear start, rear fog lamp, or traction control switch located in position 2, if equipped.



3. Install the fog lamp or second gear start switch located in position 1, if equipped.



4. Install the electrical connectors (1) to the switches (3), if equipped.
5. Snap the IP accessory trim plate (2) to the IP.

Instrument Panel Accessory Trim Plate Replacement Pontiac

1. Gently pull the upper corners of the instrument panel (IP) accessory trim plate.
2. Unsnap the lower corners of the IP trim plate from the IP.
3. Remove the IP accessory trim plate from the vehicle.

1. Align the IP trim plate to the IP.
2. Insert the locating pins on the IP trim plate to the holes in the IP.
3. Apply pressure to the IP trim plate in order to snap the IP trim plate in place and secure.