GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Firebird 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Door Lamp Replacement

Door Lamp Replacement Chevrolet

Removal Procedure
  1. Remove the door switch panel from the door.
  2. Disconnect the switches electrical connectors.

    3. Object Number: 294790 Size: SH
  3. Remove the inside handle bezel screws.
  4. Remove the inside handle bezel.
  5. Disconnect the harness socket from the bezel.
  6. Remove the bulb from the socket.

Installation Procedure

    Object Number: 294790 Size: SH
  1. Install the bulb to the socket.
  2. Connect the harness socket to the bezel.
  3. Install the inside handle bezel.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the inside handle bezel screws.

    5. Tighten
    Tighten the screws to 1.4 N·m (12 lb in).

  5. Connect the switches electrical connectors.
  6. install the door switch panel to the door.

Door Lamp Replacement Pontiac

Removal Procedure
  1. Remove the door switch panel from the door.
  2. Disconnect the switches electrical connectors.

    3. Object Number: 294781 Size: SH
  3. Remove the inside handle bezel screw.
  4. Remove the inside handle bezel.
  5. Disconnect the socket from the inside handle bezel.
  6. Remove the bulb from the socket.

Installation Procedure

    Object Number: 294781 Size: SH
  1. Install the bulb to the socket.
  2. Install the socket to the inside handle bezel.
  3. Install the inside handle bezel.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the inside handle bezel screw.

    5. Tighten
    Tighten the screw to 1.4 N·m (12 lb in).

  5. Install the door switch panel to the door.
  6. Connect the switches electrical connectors.