Rear Fog Lamp Bulb Replacement Export

Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:

•	Turn off the lamp switch and allow the bulb to cool before changing the bulb.

•	Leave the lamp switch OFF until the bulb change is complete.

•	Always wear eye protection when changing a halogen bulb.

•	Handle the bulb only by its base. Avoid touching the glass.

•	Keep dirt and moisture off the bulb.

•	Properly dispose of the used bulb.

•	Keep halogen bulbs out of the reach of children.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



2. Disconnect the rear fog lamp electrical connector.
3. Remove the rear fog lamp bulb (1) from the harness socket.

1. Install the rear fog lamp bulb (1) to the harness socket.
2. Connect the rear fog lamp electrical connector.
3. Lower the vehicle.