Rear Fog Lamp Switch Replacement Export

1. Remove the instrument panel accessory trim plate.
2. Disconnect the rear fog lamp switch (1) electrical connector.

Important: The rear fog lamp switch (1) will be located in either the 2nd or 3rd position in the trim plate, depending on option content.

3. Disconnect the electrical connector from one of the following switches (2), if equipped:

•	Traction control

•	Second gear start

•	Front fog lamp




4. Remove the rear fog lamp switch from the instrument panel trim plate.

1. Install the rear fog lamp switch to the instrument panel trim plate.
2. Connect the electrical connector to one of the following switches if equipped:

•	Traction control

•	Second gear start

•	Front fog lamp




3. Connect the rear fog lamp switch (1) electrical connector.
4. Install the Instrument panel accessory trim plate.