Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Diagnostic System Check? | -- | ||
2 |
Do the instrument panel lamps illuminate at maximum intensity? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 | Connect a test lamp between the IP dimmer switch connector terminal D and ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | ||
4 | Connect a test lamp between the IP dimmer switch connector terminal A and ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | ||
5 | Repair the open in circuit 9 between the IP dimmer switch and S226. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
6 | Test for and repair a poor connection at the IP dimmer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and repair a poor connection? | -- | ||
7 | Replace the headlamp switch. Refer to Headlamp Switch Replacement . Did you complete the replacement? | -- | -- | |
8 | Connect a test lamp between the IP fuse block terminal E5 and ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate | -- | ||
9 | Repair the open in circuit 8 between the IP fuse block and S224. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
10 | Repair the open in circuit 44 between the IP fuse block and the IP dimmer switch. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
