Name | Location | Locator View | Connector End View |
|---|---|---|---|
Data Link Connector (DLC) | Under the IP, right of the steering column | ||
Electronic Brake Control Module (EBCM) | Mounted with brake pressure modulator valve on the top of the left front frame rail | Antilock Brake System Component Views in ABS Traction Control | Antilock Brake System Connector End Views in Antilock Brake System |
Inflatable Restraint Sensing and Diagnostic Module (SDM) | On the floor tunnel, below the rear of the console | SIR Component Views in SIR | SIR Connector End Views in SIR |
Instrument Cluster | On the left side of the IP | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
IP Fuse Block | On the left end of the IP carrier | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges and Console | -- |
Powertrain Control Module (PCM) (V6 VIN K) | On the right side of the engine compartment, rear of the wheelhouse | Power and Grounding Component Views in Wiring Systems | Powertrain Control Module Connector End Views in Engine Controls |
Powertrain Control Module (PCM) (V8 VIN G) | On the right side of the engine compartment, rear of the wheelhouse | Engine Controls Component Views in Engine Controls | Powertrain Control Module Connector End Views in Engine Controls |
Splice Pack SP200 | Under the left side of the IP, near the DLC | Lighting Systems Component Views in Lighting Systems | |
C200A (17 cavities) | Forward lamp to IP harness, between the left kick panel and the steering column | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200D (48 cavities) | Part of the IP harness, between the left kick panel and the steering column | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C220 (10 cavities) | IP to engine harness, under the right side of the IP, behind the knee bolster | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C230 (10 cavities) | IP to engine harness, under the right side of the IP, behind the knee bolster | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G110 (V6 VIN K) | In the front of the engine, bolted to the pulley above the A/C clutch connector | Harness Routing Views in Wiring Systems | -- |
G110 (V8 VIN G) | Attached to the rear of the left cylinder head | Harness Routing Views in Wiring Systems | -- |
G200 | Near the left A-pillar, bolted to the IP mounting stud behind the kick panel | Harness Routing Views in Wiring Systems | -- |
P100 | Left side in the dash panel, engine to the passenger compartment | Harness Routing Views in Wiring Systems | -- |
P110 | Right side in the dash panel, engine to the passenger compartment | Harness Routing Views in Wiring Systems | -- |
S110 (V6 VIN K) | In the engine harness, approximately 4 cm (1.6 in) from the powertrain control module (PCM) breakout | -- | -- |
S110 (V8 VIN G) | In the engine harness, main branch, approximately 20 cm (7.9 in) from the powertrain control module (PCM) breakout | -- | -- |
S215 | In the IP harness, main branch, approximately 11 cm (4 in) from the antenna cable breakout | -- | -- |
S216 | In the IP harness, main branch, approximately 10 cm (4 in) from the instrument cluster breakout | -- | -- |
S217 | In the IP harness, main branch, approximately 18 cm (6.8 in) from the body control module (BCM) breakout | -- | -- |
S240 | In the IP harness, main branch, approximately 17 cm (6.7 in) from the antenna cable breakout | -- | -- |
