GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Firebird 🢒 HVAC 🢒 HVAC Systems - Manual 🢒 Blower Motor Resistor Replacement

Removal Procedure

    Object Number: 282923 Size: SH
  1. Remove the key from the ignition in order to assure that the ignition switch will remain in the OFF position.
  2. Remove the right instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gauges and Console.
  3. Pull the carpet away from the heater module.
  4. Remove the blower motor resistor bolt (2).
  5. Disconnect the blower motor resistor electical connector.
  6. Remove the blower motor resistor (1).

Installation Procedure

    Object Number: 282923 Size: SH
  1. Install the blower motor resistor (1).
  2. Connect the blower motor resistor electical connector.
  3. Install the blower motor resistor bolt (2).

    4. Tighten
    Tighten the blower motor resistor bolt to 2 N·m (18 lb in).

  4. Reposition the carpet.
  5. Install the right instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gauges and Console.
  6. Test the blower motor operation at each of the four speeds.