GM Service Manual Online
For 1990-2009 cars only

    Object Number: 220932  Size: SH
  1. Remove the key from the ignition switch.
  2. Connect the passenger yellow 2-way connector (C219) located behind the I/P compartment door.

  3. Object Number: 220930  Size: SH
  4. Install the connector position assurance (CPA) to the passenger yellow 2-way connector located behind the I/P compartment door.
  5. Install the right instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gauges and Console.

  6. Object Number: 220929  Size: SH
  7. Connect the driver yellow 2-way connector (C218) located at the base of the steering column.

  8. Object Number: 220928  Size: SH
  9. Install the connector position assurance (CPA) to the driver yellow 2-way connector located at the base of the steering column.
  10. Install the left instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gauges and Console.

  11. Object Number: 310933  Size: SH
  12. Install the AIR BAG fuse in the IP fuse block.
  13. Install the I/P fuse block access door.
  14. Staying well away from both air bags, turn the ignition switch to the RUN position.
  15. 10.1. The AIR BAG warning lamp will flash 7 times.
    10.2. The AIR BAG warning lamp will then turn OFF.
  16. Perform the SIR Diagnostic System Check if the AIR BAG warning lamp does not operate as described. Refer to Diagnostic System Check - SIR .