Tools Required

1. Remove two strut mounting nuts from the left and right side strut towers.
2. Attach the engine support fixture adapters J 28467-90A to the strut tower studs.
3. Install the engine support fixture adapters J 41044-1 and J 41044-2 onto the fixture adapters J 28467-90A on each strut tower.
4. Secure with the wings nuts provided.



5. Place the cross bar J 28467-3 into the engine support adapters J 41044-1 and J 41044-2.
6. Install the quick release pins.
7. Thread the lift hooks J 28467-50 and J 28467-8 or (8A) into the support hook brackets J 28467-6A.
8. Place the support hook brackets J 28467-6A over the cross bar J 28467-3 and connect the hooks to the engine lift brackets.
9. Tighten the large wing nuts J 28467-34.