Radiator Outlet Hose Replacement 3.8 L

1. Drain the cooling system. Refer to Cooling System Draining and Filling .



2. Disconnect the intake air temperature (IAT) sensor electrical connector.



3. Remove the air intake duct resonator.



4. Remove the outlet hose from the water pump.
5. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



6. Remove the outlet hose (2) from the radiator.
7. Remove the hose support from the fan shroud.

1. Install the outlet hose support to the fan shroud.
2. Install the outlet hose (2) to the radiator.
3. Lower the vehicle.



4. Install the outlet hose to the water pump.



5. Install the air intake duct resonator.



6. Connect the IAT sensor electrical connector.
7. Refill the cooling system. Refer to Cooling System Draining and Filling .

Radiator Outlet Hose Replacement 5.7 L

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Disconnect the intake air temperature (IAT) sensor electrical connector.
3. Disconnect the mass airflow (MAF) sensor electrical connector.



4. Remove the air intake duct resonator.



5. Remove the outlet hose from the water outlet.
6. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



7. Remove the outlet hose (2) from the radiator.

1. Install the outlet hose (2) to the radiator.
2. Lower the vehicle.



3. Install the outlet hose to the water outlet.



4. Install the air intake duct resonator.



5. Connect the IAT sensor electrical connector.
6. Connect the MAF sensor electrical connector.
7. Refill the cooling system. Refer to Cooling System Draining and Filling .